yzc88亚洲城

您好,欢迎访问yzc88亚洲城经营部官网!
yzc88亚洲城

联系人:路经理

QQ:281288859

手机:15813464541

电话:0757-83879733

地址: 广东佛山市禅城区石湾街道澜石水暖批发市场E排2座7号

您的位置:yzc88亚洲城 > 资讯中心

要想【密闭套管加工】好,基本常识不能少!

时间:2018/7/16 19:24:50

ca88会员登录入口的加工如下:
风套管出墙100MM,套管要进行除锈,事先检查好有无裂缝,用无缝钢管较好(当然了,通风短管要除外);穿墙套管的密闭翼环周边应该满焊,穿墙套管(也就是短管)加工完毕后,在它的外壁用冷底子油刷一遍;测准穿墙套管(短管)的轴线位置和标高后,把套管与周围的钢筋点焊牢固。管子的中心与墙面垂直;在混凝土浇灌的时候,要有专人负责看护以防发生位移,套管周围的混凝土要捣鼓密实喽。同时要把周围的气泡除掉,以免造成渗水的现象。
The processing of the closed casing is as follows:
When the wind casing is out of the wall 100MM, the casing should be derusting, the crack is checked well in advance, the seamless steel pipe is better (except for the ventilation short pipe), the closed wing ring around the wall casing should be full welding, after the wall casing (also short pipe) is finished, the cold bottom oil is used to brush the outer wall of the casing, and the wall sleeve is measured. After the axis position and elevation of the short tube, the casing and the surrounding reinforcement are firmly welded. The center of the pipe is perpendicular to the wall; when the concrete is poured, there must be a special person to take care to prevent the displacement. The concrete around the casing should be compacted and dense. At the same time, remove the bubbles around, so as not to cause seepage.
密闭套管加工

联系方式

联系人:路经理

手机:18664230516

电话:0757-83879733

Q  Q:281288859

地址: 广东佛山市禅城区石湾街道澜石水暖批发市场E排2座7号

扫一扫进手机网站

yzc88亚洲城

版权所有 www.yzc88.com_yzc88亚洲城_ca88手机版会员登录入口 粤ICP备17154428号 技术支撑:ca88会员登录入口 | Sitemap 地图